If you notice, I had an issue with the lock being tight at the back of the door cutout and slightly damaged the fiberglass. You will need to angle out the lock mechanism very carefully. Next – Remove the lock portion of the handle assembly. Once the screws are removed, remove the door edge plate and set it aside. This keeps the lock portion of the handle in place in the door. With the door slightly open, remove the screws that hold the door edge plate to the door. Note, you’ll want to have the door opened before removing the handle. Once the four screws are loosened, the inside portion of the door handle should come off easily. In my situation, four Philips head screws needed to be removed. Next – Remove the inside screws of the door handle. If it feels loose, you may have an issue where the deadbolt is failing. It should have considerable resistance when turning the handle. You can easily check this by manipulating the red handle to the deadbolt from inside the RV. Red Lock Handle Should Have ResistanceĪs mentioned, my lock was becoming looser over time. This process simply walks through how I tackled the issue while on the road.įirst – Check to see the play in your deadbolt lock. I don’t consider this job too difficult for the average RV owner, but if you are uncomfortable with any step in this process, please consult a professional. We will also have the written process document published on in the Resources area. Please be aware that this DIY job is not for everyone, and you need to review this process carefully before deciding to take on this task. So, let’s go over the step-by-step process of doing this door lock replacement. So be aware that if your RV door’s deadbolt starts feeling loose, it could be ready to fail. Within a few days, the new handle and lockset arrived at the campground, and we were able to do the replacement. Pretty quickly, I ordered a replacement door handle and lock. After a bit, I did figure out how to get back in without breaking any window or door. The next minute it was easy to be alarmed as I wondered how to get back into my locked RV. So, the lock was engaged, and the key wouldn’t work! Check the Play in the Lock Unfortunately, this was after the deadbolt had engaged. The key turned around and around in the deadbolt while trying to unlock the door. I didn’t think much about it until leaving the trailer one day and locking the door. I had noticed that the deadbolt on my original equipment RV door lock was getting looser to operate over time. John’s Keystone Bullet and Tundra with Starlink at Lake Kissimmee State Park Lot 15, Florida Replacing the lock is not a difficult task that most RV owners should be able to tackle. Having your door lock fail and not being able to get into the RV can be a startling situation and leave you outside looking in. In this blog, I’ll talk about a recent problem while on the road with the RV door lock on my Keystone Bullet 243BHS and the step-by-step process we took to replace the lock.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |